Showing 1–36 of 49 results

Show sidebar
Close

1A Felt ( hard floors)

0,45
This insert is very suitable for hard floors. Is often used on laminate and (stone) tile floors. Because the felt has melted thermally with the click part, the felt will not slide out from underneath, which is the most common complaint of other caps and adhesive felts.
Close

1B Black ( Carpet, outside )

0,50
This is suitable for outside, but can also be used indoors on carpet.
Close

1C Hyper ( all floors)

0,70
This all-rounder is suitable for all floors, but because this is a hard insert it will produce more noise on hard floors. Very suitable for places where sliding with heavy chairs, or for example in the care where people have to be pushed while sitting in a chair.
Close

1F Ultrasoft

0,60
It has the same practical properties as felt. This felt contains a percentage of wool, which makes it more expensive, but also has a slightly longer life.
Close

2A Vilt

0,55
This insert is very suitable for hard floors. Is often used on laminate and (stone) tile floors. Because the felt has melted thermally with the click part, the felt will not slide out from underneath, which is the most common complaint of other caps and adhesive felts.
Close

2B Black

0,60
This is suitable for outside, but can also be used indoors on carpet.

2C Hyper

0,80
This all-rounder is suitable for all floors, but because this is a hard insert it will produce more noise on hard floors. Very suitable for places where sliding with heavy chairs, or for example in the care where people have to be pushed while sitting in a chair.

2F Ultrasoft

0,70
It has the same practical properties as felt. This felt contains a percentage of wool, which makes it more expensive, but also has a slightly longer life.
Close

3A Vilt

0,65
This insert is very suitable for hard floors. Is often used on laminate and (stone) tile floors. Because the felt has melted thermally with the click part, the felt will not slide out from underneath, which is the most common complaint of other caps and adhesive felts.
Close

3B Black

0,70
This is suitable for outside, but can also be used indoors on carpet.

3C Hyper

0,90
This all-rounder is suitable for all floors, but because this is a hard insert it will produce more noise on hard floors. Very suitable for places where sliding with heavy chairs, or for example in the care where people have to be pushed while sitting in a chair.
Close

3F Ultrasoft

0,80
It has the same practical properties as felt. This felt contains a percentage of wool, which makes it more expensive, but also has a slightly longer life.
Close

4A Vilt

0,95
This insert is very suitable for hard floors. Is often used on laminate and (stone) tile floors. Because the felt has melted thermally with the click part, the felt will not slide out from underneath, which is the most common complaint of other caps and adhesive felts.
Close

4C Hyper

1,15
This all-rounder is suitable for all floors, but because this is a hard insert it will produce more noise on hard floors. Very suitable for places where sliding with heavy chairs, or for example in the care where people have to be pushed while sitting in a chair.
Close

6C Hyper

1,75
This all-rounder is suitable for all floors, but because this is a hard insert it will produce more noise on hard floors. Very suitable for places where sliding with heavy chairs, or for example in the care where people have to be pushed while sitting in a chair.
Close

6F Ultrasoft

1,30
It has the same practical properties as felt. This felt contains a percentage of wool, which makes it more expensive, but also has a slightly longer life.
Close

Assembly stem with press cap W4

0,50
Replaces the current sleeve under your chair with a new one, they are very similar, but the dimensions on the inside are different and ensure that the metal pin cannot rotate freely.
Close

Basis (20mm) 1-1

0,40
Round base of 20mm. to screw under the chair leg (including screw).
Close

Basis (25mm) 2-2

0,45
Round base of 25mm. to screw under the chair leg (including screw).
Close

Basis (30mm) 3-3

0,45
Round base of 30mm. to screw under the chair leg (including screw).
Close

Basis (M10) 51-1

1,95
Replaces your current leveling foot with an M10 thread. Basculating foot, which adapts to the tilt of the leg.
Close

Basis (M10) 53-3

1,95
Replaces your current leveling foot with an M10 thread. Basculating foot, which adapts to the tilt of the leg.
Close

Basis (M8) 50-1

1,95
Replaces your current leveling foot with an M10 thread. Basculating foot, which adapts to the tilt of the leg.
Close

Basis (M8) 52-3

1,95
Replaces your current leveling foot with an M8 thread. Basculating foot, which adapts to the tilt of the leg.
Close

Basis 23-4

1,05
Oval base of 20x35mm. to screw under the cantilever (excluding screw). Tube diameter 25mm. You must fix the bases for the sled frame with the “old” screws or order new ones from us. Which screws? This depends on the possibilities and holes in the frame. Please contact us about this.
Close

Basis 29-4

1,95
Anti-tip cap to screw under the cantilever (excluding screw). Tube diameter 25mm. You must fix the bases for the sled frame with the “old” screws or order new ones from us. Which screws? This depends on the possibilities and holes in the frame. Please contact us about this.
Close

Basis 30-6

1,95
Rectangular cap 32x15mm. to "click" under a 11mm wire frame.
Close

Basis 32-6

1,95
Rectangular cap 32x15mm. to "click" under a 14mm wire frame.
Close

Basis 4-4 (20x35mm)

0,85
Oval base of 20x35mm. to screw under the seat leg (including screw).

Basis 56-1 ( Ball Cap 10mm)

1,50
Replaces your current cap for a round foot of 10mm.
Close

Basis 58-2 (Ball Cap 11mm.)

1,50
Replaces your current cap for a round foot of 11mm.
Close

Basis 74-1 (15mm.)

1,50
Replaces your current cap from your metal tube with an inner diameter of 15mm.
Close

Basis 81-1 (10mm.)

1,50
Replaces your current cap from your metal tube with an inner diameter of 10mm.
Close

Basis 82-1 (12mm,)

1,50
Replaces your current cap from your metal tube with an inner diameter of 12mm.
Close

Basis 83-1 (14mm.)

1,50
Replaces your current cap from your metal tube with an inner diameter of 14mm.
Close

Basis 84-1 (16mm.)

1,50
Replaces your current cap from your metal tube with an inner diameter of 16mm.